How to Clean a Bass Fretboard Without Damaging It

How to Clean a Bass Fretboard Without Damaging It

To clean a bass fretboard, take the strings off, wipe the board with a dry soft cloth, remove grime next to the frets with a soft toothbrush or a slightly damp cloth, and dry it right away. On unfinished rosewood or ebony, rub in a very thin coat of fretboard oil and wipe off the excess. Finished maple boards need no oil.

A dirty fretboard is not only a cosmetic problem. Sweat, skin and dust build up next to the frets, the strings die faster, and an unfinished board that gets too dry can show small cracks, or sharp fret ends that stick out at the edges of the neck. Cleaning it takes a few minutes and the best time to do it is when you change strings anyway. My bass guitar strings guide mentions this briefly. Here is the full process.

Free: Slap Bass Starter Pack

5 video lessons with slow-motion takes, drum loops and tabs. Enter your email and download it right away.

Free download right after signup. Privacy

What Kind of Fretboard Do You Have?

The first question decides everything else: is the wood finished or not? Run a finger over the board between the frets.

FretboardFinishHow to cleanOil?
Rosewood, pau ferroUsually unfinished, dry feel, open grainDry cloth, toothbrush, slightly damp clothYes, thin coat when dry
EbonyUsually unfinished, smooth and darkDry cloth, toothbrush, slightly damp clothYes, thin coat when dry
MapleUsually lacquered, glossy or satinDry or slightly damp clothNo
Roasted maple, laurel and othersCheck with the makerDry cloth to startFollow the maker

If the board feels like the painted body, smooth and sealed, it is finished. If it feels like raw wood and you can see the grain, it is unfinished. When you are not sure, check the maker’s website for your model.

How Do You Clean a Fretboard Step by Step?

  1. Remove the strings. My guide on how to change bass strings shows the safe way to do it, including why to photograph the headstock first.
  2. Wipe the whole board with a dry, soft, lint-free cloth. Most of the dirt comes off here.
  3. Clean the grime that sits against the frets with a soft toothbrush. Brush along the fret, not across the wood.
  4. For dirt that does not come off dry, use a cloth that is only slightly damp, wrung out until it is nearly dry. Wipe, then dry the board right away. Water should never stand on the wood.
  5. For a hard ridge of old grime against a fret, scrape gently with a fingernail or a plastic pick. Never use a blade.
  6. Let the board dry fully before the next step.

How Do You Oil a Rosewood or Ebony Fretboard?

Unfinished wood can dry out, especially in heated rooms in winter. Oil keeps it from looking pale and dry. You need very little.

  • Use a product made for fretboards. Lemon oil sold for guitars is mostly mineral oil with a lemon scent, and that is what is meant when players talk about lemon oil. Do not use pure lemon essential oil or furniture polish.
  • Put a few drops on a cloth, not on the board, and rub a thin coat into the wood between the frets.
  • Leave it for a few minutes, then wipe off everything that has not soaked in. The board should look fresh, not wet or shiny.

Oil only when the wood looks dry or pale. Doing it too often adds nothing, and excess oil sitting under the frets is not good for the board.

How Do You Clean a Maple Fretboard?

A lacquered maple board is cleaned like the body of the bass. A dry cloth for regular cleaning, a slightly damp cloth for dirt, then dry it. Oil cannot soak through the finish, so it only leaves a greasy film. Over many years the finish wears through in the low positions and the wood underneath turns grey. That is normal wear. Keeping the board clean slows it down.

Should You Polish the Frets?

Frets dull over time and a clean, polished fret makes bends and slides feel smoother. Fret polishing cloths and fret guards, thin metal or plastic masks that cover the wood around each fret, make it easy and safe.

Fine steel wool is the old method. It works, but the tiny steel particles are drawn to the pickup magnets and are hard to remove. If you use it, cover the pickups with tape first and clean up carefully afterward. Never use steel wool on a finished maple board, because it dulls and scratches the lacquer. Use fret guards and a polishing cloth there.

What Should You Never Use on a Fretboard?

  • Household cleaners, glass cleaner and kitchen sprays.
  • Furniture polish with silicone or wax.
  • Alcohol on finished parts, because it can damage the lacquer.
  • Lots of water.
  • Thick coats of oil, or oil on a finished maple board.

How Do You Keep a Fretboard Clean Longer?

Wash and dry your hands before you play. Wipe the strings and the board with a dry cloth after playing, which also makes the strings last longer. Store the bass in its case or gig bag, away from heaters and direct sun. If the strings start to feel rough or sound dull sooner than they used to, it is usually a sign the board and strings need attention. After a full clean and new strings, check the setup, as described in my guide to bass guitar setup.

Frequently Asked Questions

What can I use to clean my fretboard?

A dry soft cloth for regular cleaning, a soft toothbrush for grime next to the frets, and a cloth that is only slightly damp for stubborn dirt, followed by drying right away. Products made for fretboards are fine. Avoid household cleaners.

Should I oil a maple fretboard?

Usually not. Most maple fretboards are finished with lacquer, and oil cannot soak into the wood. Clean them with a dry or slightly damp cloth, like the rest of the finished parts of the bass.

How often should I oil a rosewood fretboard?

Only when the wood looks dry or pale, not at every string change. A very thin coat of fretboard oil or lemon oil made for guitars, with the excess wiped off, is enough.

Can I use steel wool on my fretboard?

Fine steel wool is sometimes used to polish frets, but the small steel particles stick to the pickup magnets. If you use it, cover the pickups first. A fret polishing cloth with fret guards is safer. Never use steel wool on a finished maple board, because it dulls and scratches the lacquer.

Is lemon oil bad for a fretboard?

Fretboard lemon oil is mostly mineral oil with a little lemon scent and is fine on unfinished rosewood and ebony in small amounts. Pure lemon essential oil and furniture polish are not the same thing and should not be used.

Do I need to remove the strings to clean the fretboard?

For a quick wipe, no. For a proper clean and for oiling, yes. The easiest time is when you change strings anyway.

New to Bass? Start Here

Start free with my step-by-step guide on how to play bass guitar and the free Slap Bass Starter Pack. After your first few weeks, send me a video of your playing for a $25 review, and I will show you what to fix before bad habits set in. If you would rather learn with a teacher live, book a 60-minute lesson over Zoom.

Free Slap Bass Starter Pack →Video review, $25 →Live lesson, $60 →
↑